Nr. | Bezeichnung | | |
---|
1 | 10 Biconical sealing rings with 1/16", PEEK | |
2 | 10 Bushings for capillaries with 1/16" OD, SSt short, dynaseal | |
3 | 10 Sealing rings for capillaries with 1/16" OD, PEEK | |
4 | 10 Sealing rings for capillaries with 1/8" OD, PEEK | |
5 | 1CryoBio FlexiQuot™ | |
6 | 25 Bushings for capillaries with 1/16" OD, stainless steel, wrench caliber 1/4", UNF 10-32, short | |
7 | 30 Ferrules for capillaries with 1/16" OD, stainless steel | |
8 | 5 mm Pyrex Adapter (LPV) with 14/20 Outer Joint | |
9 | 8-Channel Plastic Adaptor for Disposable Tips, with Ejection Device | |
10 | 96V WITH LID SI MICROWELL PLATE | |
11 | Al-case Heating Mantles with Controller, 230 V, capacity 50 ml | |
12 | Auslege Adapter (3) für PT 6100 D, zur Verbindung mit einem H-Fussständer ST-F11/855 | |
13 | BIO-LAB-TOP (0.48x50 m) Surface protection paper, one side coated with polyethylene, length: 50 m, width: 48 cm, Pack of 1 roll | |
14 | BIO-LAB-TOP (0.60x100 m) Surface protection paper, one side coated with polyethylene, length: 100 m, width: 60 cm, Pack of 1 ro | |
15 | BIO-LAB-TOP (0.60x50 m) Surface protection paper, one side coated with polyethylene, length: 50 m, width: 60 cm, Pack of 1 roll | |
16 | BIO-LAB-TOP (48x60 cm, 50 sheets) Surface protection paper, one side coated with polyethylene, size: 48 x 60 cm, Pack of 50 | |
17 | Birkenstock "A 640 with Steelcap" Gr.38 weiß, Birki-Schaum | |
18 | Birkenstock "A 640 with Steelcap" Gr.39 weiß, Birki-Schaum | |
19 | Birkenstock "A 640 with Steelcap" Gr.41 weiß, Birki-Schaum | |
20 | Birkenstock "A 640 with Steelcap" Gr.44 blau, PU, für normale, kräftige Füße | |
21 | CELLview Zellkulturschalen 35x10 mm mit Glasboden, PS, Advanced TC, steril, VE=40 | |
22 | CELLview Zellkulturschalen 35x10 mm mit Glasboden, PS, viergeteilt, Advanced TC, steril, VE=40 | |
23 | Centering Ring Adaptor with FKM O-Ring, Stainless Steel, DN 10/16 KF | |
24 | Centering Ring Adaptor with FKM O-Ring, Stainless Steel, DN 20/25 KF | |
25 | Centering Ring Adaptor with FKM O-Ring, Stainless Steel, DN 32/40 KF | |
26 | Centering Ring Adaptor with FPM O-Ring, Stainless Steel, DN 10/16 KF | |
27 | Centering Ring Adaptor with FPM O-Ring, Stainless Steel, DN 20/25 KF | |
28 | Centering Ring Adaptor with FPM O-Ring, Stainless Steel, DN 32/40 KF | |
29 | Centering Ring with Fine Filter and FKM O-Ring, Stainless Steel, DN 40 KF | |
30 | Centering Ring with Fine Filter and FPM O-Ring, Stainless Steel, DN 63 ISO-K | |
31 | Centering Ring with Fine Filter and FPM O-Ring, Stainless Steel, DN 25 KF | |
32 | Centering Ring with Fine Filter and FPM O-Ring, Stainless Steel, DN 16 KF | |
33 | Centering Ring with Fine Filter and FPM O-Ring, Stainless Steel, DN 40 KF | |
34 | Centering Ring with Fine Filter and FPM O-Ring, Stainless Steel, DN 100 ISO-K | |
35 | Centering Ring with FKM O-Ring, Aluminium, DN 40 KF | |
36 | Centering Ring with FKM O-Ring, Stainless Steel, DN 25 KF | |
37 | Centering Ring with FKM O-Ring, Stainless Steel, DN 40 KF | |
38 | Centering Ring with FPM O-Ring Stainless Steel, DN 250 ISO-K | |
39 | Centering Ring with FPM O-Ring, Aluminum, DN 25 KF | |
40 | Centering Ring with FPM O-Ring, Aluminum, DN 40 KF | |
41 | Centering Ring with FPM O-Ring, Stainless Steel, DN 100 ISO-K | |
42 | Centering Ring with FPM O-Ring, Stainless Steel, DN 160 ISO-K | |
43 | Centering Ring with FPM O-Ring, Stainless Steel, DN 200 ISO-K | |
44 | Centering Ring with FPM O-Ring, Stainless Steel, DN 40 KF | |
45 | Centering Ring with FPM O-Ring, Stainless Steel, DN 63 ISO-K | |
46 | Centering Ring with Screen and FKM O-Ring, Stainless Steel, DN 40 KF | |
47 | Centering Ring with Screen and FPM O-Ring, Stainless Steel, DN 100 ISO-K | |
48 | Centering Ring with Screen and FPM O-Ring, Stainless Steel, DN 160 ISO-K | |
49 | Centering Ring with Screen and FPM O-Ring, Stainless Steel, DN 63 ISO-K | |
50 | Centering Ring with Screen and FPM O-Ring, Stainless Steel, DN 40 KF | |
51 | Centering Ring with Screen and FPM O-Ring, Stainless Steel, DN 25 KF | |
52 | Centering Ring with Screen and FPM O-Ring, Stainless Steel, DN 16 KF | |
53 | Claws for DN 160 - DN 250 ISO-K with Long Bolts, M10 x 35 | |
54 | Claws for DN 160 - DN 250 ISO-K with Short Bolts, M10 x 35 | |
55 | Claws for DN 63 - DN 100 ISO-K with Long Bolts, M8 x 35 | |
56 | Claws for DN 63 - DN 100 ISO-K with Short Bolts, M8 x 30 | |
57 | Culture Plates (24 sets) 96-well blocks with 2.1 ml square wells and gas-permeable foil, pack of 24 | |
58 | Culture Plates (4 sets) 96-well blocks with 2.1 ml square wells and gas-permeable foil, pack of 4 | |
59 | Deckelgriff mit Verriegelung, weiß | |
60 | Dispergiergefäß GS 15KL08 mit Schraubkappe, Loch 8 mm, Arbeitsvolumen 35 ml, Borosilikatglas | |
61 | Dispergiergefäß GS 25KL20 mit Schraubkappe, Loch 20 mm, Arbeitsvolumen 150 ml, Borosilikatglas | |
62 | Dispergiergefäß GS 40KL20 mit Schraubkappe, Loch 20 mm, Arbeitsvolumen 500 ml, Borosilikatglas | |
63 | Dispergiergefäß GS 40KL26 mit Schraubkappe, Loch 26 mm, Arbeitsvolumen 500 ml, Borosilikatglas | |
64 | Dispergiergefäß GS 50KL20 mit Schraubkappe, Loch 20 mm, Arbeitsvolumen 900 ml, Borosilikatglas | |
65 | Dispergiergefäß GS 50KL26 mit Schraubkappe, Loch 26 mm, Arbeitsvolumen 900 ml, Borosilikatglas | |
66 | Dispergiergefäß GS 60K mit Schraubkappe, Arbeitsvolumen 1300 ml, Borosilikatglas | |
67 | Dispergiergefäß GS 60KL20 mit Schraubkappe, Loch 20 mm, Arbeitsvolumen 1300 ml, Borosilikatglas | |
68 | Dispergiergefäß GS 60KL25 mit Schraubkappe, Loch 25 mm, Arbeitsvolumen 1300 ml, Borosilikatglas | |
69 | Drain for all LVS condensor, with hose nozzle DN 8, with KS 35 | |
70 | Druckverschlußbeutel 250x350 mm 0,05 mm St. mit weißem Stempelfeld PE, VE=1000 | |
71 | Einlass-Liner für Shimadzu GC | |
72 | Einweg Inoculator, montiert mit einzel Inoculum Einsatz steril, VE=5x10 | |
73 | Elution Plate, flat-bottom (20) 96-well microplates with 370 µl flat-bottom wells, Pack of 20 | |
74 | Elution Plate, u-bottom (20) 96-well microplates with 300 µl u-bottom wells, Pack of 20 | |
75 | Elution Plate, u-bottom (24 sets) 96-well microplates with 300 µl u-bottom wells and self-adhering foil, pack of 24 | |
76 | Ethanol 70% in Wasser mit 1 % Isopropanol, 5ltr. Entzündbarer flüssiger Stoff N. A. G. UN 1993, 3, II, (D/E) | |
77 | Eurospher 100-3 C18 Column | |
78 | Eurospher 100-3 C18 Column | |
79 | Eurospher 100-3 Si Column | |
80 | Eurospher 100-3 Si Column | |
81 | Eurospher 100-5 Si Column | |
82 | Eurospher 100-5 Si Column | |
83 | Eurospher 100-5 Si Column | |
84 | Eurospher II 100-3 HILIC Column | |
85 | Eurospher II 100-3 HILIC Column | |
86 | Eurospher II 100-3 HILIC Column | |
87 | Eurospher II 100-3 Phenyl Column | |
88 | Eurospher II 100-3 Phenyl Column | |
89 | Eurospher II 100-3 Phenyl Column | |
90 | Eurospher II 100-3 Si Column | |
91 | Eurospher II 100-3 Si Column | |
92 | Eurospher II 100-3 Si Column | |
93 | Eurospher II 100-5 HILIC Column | |
94 | Eurospher II 100-5 HILIC Column | |
95 | Eurospher II 100-5 HILIC Column | |
96 | Eurospher II 100-5 Si Column | |
97 | Eurospher II 100-5 Si Column | |
98 | Eurospher II 100-5 Si Column | |
99 | Eurospher II Chiral AM 10 µm Column | |
100 | External Centering Ring with FKM O-Ring, Aluminium, DN 40 KF | |
101 | External Centering Ring with FKM O-Ring, Aluminium, DN10/16 KF | |
102 | External Centering Ring with FPM O-Ring, Aluminium, DN 40 KF | |
103 | Flaschen für Suspensionskultur 50 ml PS, Schraubverschluss weiß, krystal klar, steril, VE=200 | |
104 | Flaschen für Suspensionskultur 550 ml PS, flache Form, mit Schraubverschluss weiß, kristal klar, steril, VE=50 | |
105 | Flow cell UV, 10 mm 10 µl, 1/16", stainless steel, with heat exchanger one sided inlet and outlet | |
106 | Hinge clamp ring with closure by ring and nut bolt, DN 32/40 KF | |
107 | JAR WITH COVER PC;4.7L | |
108 | JAR WITH COVER PC;8.3L | |
109 | K-7400S Semi-Micro Osmometer with measuring head, ready for use, incl. accessories | |
110 | Kjeldahl Reagent 4% w/v Boric Acid Solution with indicator 5L | |
111 | LP 5mL Empty Rack with Lid, 10/cs | |
112 | Lysis Block (4) 96-well lysis blocks for use with NucleoSpin 96 Blood kits Pack of 4 | |
113 | Membranpumpe MP 201 E 33l/min, 75mbar, 230V, 50/60Hz 1 Ph with Schuko und UK plug leads | |
114 | MN Frame For optimized handling of NucleoSpin 96-well Plates with vacuum manifold on BioRobot 9600, 9604 and 3000 (Qiagen), Mul | |
115 | MN Square-well Block (24) 96-well blocks with 2.1 ml square wells, pack of 24 | |
116 | MN Square-well Block (4) 96-well blocks with 2.1 ml square wells, Pack of 4 | |
117 | MN Tube Strips (5 sets) Set of Racks with 12 Tube Strips (1.2 ml) each, Pack of 5 | |
118 | Nalgene Certified Clean 10L PC Biotainer with Handle, Sterile and USP<788> Compliant | |
119 | Nalgene Certified Clean 20L PC Biotainer with Handle, Sterile and USP<788> Compliant | |
120 | Nalgene Certified Clean 5L PC Biotainer with Handle, Sterile and USP<788> Compliant | |
121 | NucleoBond Bottle Top Filter Type 1 (5) 5 NucleoBond Bottle Top Filter for use with NucleoBond AX 2000 cartridges | |
122 | NucleoBond Bottle Top Filter Type 2 (5) 5 NucleoBond Bottle Top Filters for use with NucleoBond AX 10000 cartridges | |
123 | NucleoBond Finalizer Large (20) Filters for concentration and desalination of plasmid DNA, To be used with NucleoBond Xtra Maxi | |
124 | NucleoBond Finalizer Large Plus (20 sets) Filters for concentration and desalination of plasmid DNA, To be used with NucleoBond | |
125 | NucleoBond Finalizer Plus (20) Filters for concentration and desalination of plasmid DNA, To be used with NucleoBond PC 100, PC | |
126 | NucleoBond Rack Large Rack for use with NucleoBond AX 100, AX 500, AX 2000, and AX 10000 Columns | |
127 | NucleoBond Rack Small Rack for use with NucleoBond AX 20 Columns | |
128 | NucleoBond Xtra Buffer Set I Buffer set for the isolation of low-copy plasmids, BAC's, PAC's, and P1 constructs, Only | |
129 | NucleoBond Xtra Combi Rack Rack for use with NucleoBond Xtra Midi and Maxi Columns | |
130 | NucleoSpin 8 Extract II (12x8) 12 x 8 preps for the purification of PCR products, Buffers, NucleoSpin Extract Binding Strips, R | |
131 | NucleoSpin 8 Extract II (60x8) 60 x 8 preps for the purification of PCR products, Buffers, NucleoSpin Extract Binding Strips, R | |
132 | NucleoSpin Buffer Set Buffer set for the isolation of low-copy plasmids, Only applicable with NucleoSpin Plasmid kits, Sufficie | |
133 | NucleoSpin DNA Trace Bone Buffer Set Buffer set for the isolation of genomic DNA from bones with the NucleoSpin DNA Trace (25) | |
134 | NucleoSpin RNA/DNA Buffer Set Buffer set for separated isolation of RNA and DNA from one lysate, only applicable with NucleoSpi | |
135 | Okular HSWF 10x / Ø 23mm. with High-Eye-Point | |
136 | Okular HSWF 10x / Ø 23mm. with High-Eye-Point | |
137 | Okular HSWF 10x / Ø 23mm. with Skala 0,1 mm, High-Eye-Point | |
138 | Okular HSWF 20x / Ø 14,5mm. with High-Eye-Point | |
139 | Okular HWF 10x / Ø 18mm. with High-Eye-Point | |
140 | Okular HWF 10x / Ø 20mm. with High-Eye-Point | |
141 | Okular HWF 10x / Ø 21,5mm. with High-Eye-Point | |
142 | Okular HWF 10x / Ø 22mm. with High-Eye-Point | |
143 | Okular HWF 10x / Ø 22mm. with Skala 0,1 mm, High-Eye-Point | |
144 | Okular HWF 15x / Ø 15mm. with High-Eye-Point | |
145 | Okular HWF 25x / Ø 11,7mm. with High-Eye-Point | |
146 | Okular HWF 5x / Ø 23,2mm. with High-Eye-Point | |
147 | Okular SWF 15x / Ø 17mm. with Skala 0,05 mm | |
148 | Okular SWF 20x / Ø 14mm. with Skala 0,05 mm | |
149 | Okular WF 10x / Ø 18mm. with Skala 0,1 mm | |
150 | Okular WF 10x / Ø 18mm. with Skala 0,1 mm | |
151 | Okular WF 10x / Ø 18mm. with Zeiger | |
152 | Okular WF 10x / Ø 20mm. with Skala 0,1 mm | |
153 | OmniTray m. Deckel, PS 128x86mm, max. Arbeitsvol. 90ml, steril, VE=90 | |
154 | Orion-Sodium bekanntes Zusatz-Kit 1M NaCl standard with ISA, 475ml | |
155 | P 2.1S Pump P 2.1S with 10 ml pump head (Hastelloy C), without pressure sensor P 2.1S, 10 ml, Hastelloy C | |
156 | P 2.1S Pump P 2.1S with 10 ml pump head (stainless steel), without pressure sensor P 2.1S, 10 ml, stainless steel | |
157 | P 2.1S Pump P 2.1S with 50 ml pump head (stainless steel) without pressure sensor for water dosing P 2.1S, 50 ml, stainless s | |
158 | P 4.1S Pump P 4.1S with 10 ml pump head (ceramic), pressure sensor (for water) Ti-bushings P 4.1S, 10 ml, ceramic | |
159 | P 4.1S Pump P 4.1S with 10 ml pump head (hastelloy® C), pressure sensor (titanium) P 4.1S, 10 ml, hastelloy® C | |
160 | P 4.1S Pump P 4.1S with 10 ml pump head (stainless steel), pressure sensor P 4.1S, 10 ml, stainless steel | |
161 | P 4.1S Pump P 4.1S with 50 ml pump head (ceramic), pressure sensor | |
162 | P 4.1S Pump P 4.1S with 50 ml pump head (stainless steel), pressure sensor, for water P 4.1S, 50 ml, stainless steel | |
163 | Permanente Ölrückführung für CRVpro Pumpen, DN 16 KF | |
164 | pH-Elektrode H 7381-120 T1000VP mit Steckkopf (ATEX II 1/2G) | |
165 | pH-Kombinationselektroden Eutech™ mit BNC-Anschluss | |
166 | PLATE NUNC EDGE 2.0, 96 FLAT BOTTOM, CLEAR, NON-TREATED, NON STERILE WITH LID, BULK PACK, 10 PER BAG | |
167 | PLATE NUNC EDGE 2.0, 96 FLAT BOTTOM, CLEAR, NON-TREATED, STERILE, WITH LID, BULK PACK, 10 PER BAG | |
168 | PLATE NUNC EDGE 2.0, 96 FLAT BOTTOM, CLEAR, NON-TREATED, STERILE WITH LID, INDIVIDUALLY BAGGED | |
169 | PLATE NUNC EDGE 2.0, 96 FLAT BOTTOM, CLEAR, NUNCLON DELTA, STERILE WITH LID, INDIVIDUALLY BAGGED | |
170 | PLATE NUNC EDGE 2.0, 96 FLAT BOTTOM, CLEAR, NUNCLON DELTA, STERILE WITH LID, BULK PACK, 10 PER BAG | |
171 | Professional oil mist filter with oil drainback FOM 16, DN 16 KF | |
172 | Professional oil mist filter with oil drainback FOM 25, DN 25 KF | |
173 | Protein Solving Buffer Set PSB/TCEP applicable with NucleoSpin RNA/Protein kits and NucleoSpin TriPrep kits bottle of 7.5 mL Bu | |
174 | Protino Columns 14 ml (10 columns) Empty columns for use with Protino Ni-TED/IDA Resin, Filter frits, Plastic Washers, Pack of | |
175 | Protino Columns 35 ml (10 columns) Empty columns for use with Protino Ni-TED/IDA Resin, Filter frits, Plastic Washers, Pack of | |
176 | rDNase Set Recombinant DNase and rDNase Reaction Buffer, Sufficient for 50 RNA minipreparations with NucleoSpin kits (Kein ADR) | |
177 | Receiver Plate 50 µm (4) 96-well Plates with 50 µm filter frit, suitable for centrifugation, vacuum, Pack of 4 | |
178 | Receiver Plate 50 µm hydrophilized (4) 96-well Plates with 50 µm filter frit, hydrophilized, suitable for gravity flow, centrif | |
179 | Rollrandgläser 40 x 19 mm ca. 5 ml, mit Schnappdeckel, VE=200 | |
180 | Round-well Block (20) 96-well block with 1.2 ml round wells, Pack of 20 | |
181 | Round-well Block with Cap Strips (24 sets) Set of 96-well blocks with 1.2 ml round wells and Cap Strips, pack of 24 | |
182 | Round-well Block with Cap Strips (4 sets) Set of 96-well blocks with 1.2 ml round wells and Cap Strips, Pack of 4 | |
183 | Round-well Block, low (20) 96-well blocks with 0.8 ml round wells, Pack of 20 | |
184 | Round-well Block, low (24 sets) 96-well blocks with 0.8 ml round wells and self-adhering foil, pack of 24 | |
185 | Round-well Block, low (4 sets) 96-well blocks with 0.8 ml round wells and self-adhering foil, pack of 4 | |
186 | Round-well Block, low (4) 96-well blocks with 0.8 ml round wells, Pack of 4 | |
187 | Rührstab, 10 cm, mit drehbarem Ring, PTFE | |
188 | Single Channel Plastic Adaptor with Ejection Device | |
189 | Square-well Block (24) 96-well blocks with square wells, pack of 24 | |
190 | Square-well Block (4) 96-well blocks with square wells, Pack of 4 | |
191 | Starter Set C for use of NucleoSpin 8-well strips under centrifugation, Column Holders C, Rack with Tube Strips, MN Square-well | |
192 | Taschen-Endvergärungs-Saccharimeter mit blauem Wg.-Thermometer 0+30°C, und Korr. 7-14 in 1/10% mas., Tp.20°C, prüffähig | |
193 | Tauchauslaufbecher mit 4 mm Messing-Auslaufdüse "Original FRIKMAR"" mit montiertem Griff (000017) | |
194 | ThinCert Plate 6 Well PS, mit Abdeckplatte, steril, einzel verpackt, VE=50 | |
195 | ThinCert Zellkultur Einsätze für 12 Well Multiplatten, mit PET-Membran, Poren-Ø 3,0 µm, transparent, VE=48 | |
196 | ThinCert Zellkultur Einsätze für 12 Well Multiplatten, mit PET-Membran, Poren-Ø 0,4 µm, transparent, VE=48 | |
197 | ThinCert Zellkultur Einsätze für 12 Well Multiplatten, mit PET-Membran, Poren-Ø 3,0 µm, transluzent, VE=48 | |
198 | ThinCert Zellkultur Einsätze für 12 Well Multiplatten, mit PET-Membran, Poren-Ø 1,0 µm, transparent, VE=48 | |
199 | ThinCert Zellkultur Einsätze für 24 Well Platten, mit PET-Membran, Poren-Ø 8,0 µm, transluzent, VE=48 | |
200 | ThinCert Zellkultur Einsätze für 24 Well Platten, mit PET-Membran, Poren-Ø 0,4 µm, transluzent, VE=48 | |